Generated from the main branch of ‘mini.nvim’

This is the log of changes for past and current development versions. It lists changes in user-facing functionality per module (or all modules) and type.

There are following change types:

Evolve - change in previously intended functionality while adding a new one.
Refine - change in previously intended functionality without adding new one. This is usually described as a “breaking change”, but used here in a sense that it might break user’s expectations about existing functionality.
Expand - adding new functionality without affecting existing ones. This is essentially new features.

Version 0.17.0-dev

All

Evolve

Move repository hosting from personal ‘echasnovski’ GitHub account to the ‘nvim-mini’ organization. All git pull and git clone should be automatically redirected from previous to new locations without breaking user configurations. Yet updating source links to point to new locations (like 'echasnovski/mini.nvim' -> 'nvim-mini/mini.nvim' and standalone repos) is recommended.

This change is made to improve long term project stability. See more details here.
Start setting custom Neovim method implementation during setup() (if module provides one). This is usually the expected behavior for majority of use cases and should improve “out of the box” experience. Modules should still export a function to manually adjust the implementation.

It is a breaking change only if the implementation was not explicitly used. Can still be done if set or restored after calling module’s setup().

Affected modules:
- ‘mini.notify’ sets vim.notify.
- ‘mini.pick’ sets vim.ui.select.

Refine

Stop official support of Neovim 0.8.

Expand

Add new bundled color schemes based on ‘mini.hues’:
- miniwinter: “icy winter” palette with azure background.
- minispring: “blooming spring” palette with green background.
- minisummer: “hot summer” palette with brown/yellow background.
- miniautumn: “cooling autumn” palette with purple background.

mini.ai

Refine

Update gen_spec.treesitter() to have use_nvim_treesitter = false as default option value (instead of true). It used to implement more advanced behavior, but as built-in vim.treesitter is capable enough, there is no need in extra dependency. The option will be removed after the release.

Expand

Add gen_spec.user_prompt that acts the same as ? built-in textobject. It can be used for using this textobject under another identifier.

mini.completion

Evolve

Update setup() to remove “t” flag from ‘complete’ option (if not previously set and fallback action is default) as it leads to visible lags.

Expand

Add MiniCompletionWindowOpen and MiniCompletionWindowUpdate events.
Add support for highlighting LSP item label via setting abbr_hlgroup field as part of an LSP item (like inside config.lsp_completion.process_items).

mini.clue

Expand

Add gen_clues.square_brackets to generate clues for [ and ] keys. By @TheLeoP, PR #1937.

mini.diff

Expand

Add support for working with files containing BOM bytes.

mini.extra

Expand

Add pickers.colorschemes picker. By @pkazmier, PR #1789.
Add <C-e> mapping for pickers.history picker to edit commands or searches in cmdline. By @TheLeoP, PR #1960.

mini.files

Refine

Ensure preview window is never hidden, even if cursor is on the line for a not (yet) existing file system entry. This reduces flickering of preview window when creating new files in Insert mode.

mini.hues

Refine

Make black (0 and 8) and white (7 and 15) colors for built-in terminal different from regular background and foreground. This improves color coverage and does not affect default uncolored text (it is highlighted as Normal).

Expand

Add get_palette() function.

mini.jump

Expand

Trigger dedicated events during steps of jumping life cycle. See :h MiniJump-events.

mini.jump2d

Evolve

Update builtin_opts.word_start to use built-in notion of “keyword” (see :h 'iskeyword') when computing word start.

Refine

Move gen_xxx_spotter into separate gen_spotter table for consistency with other modules:
- gen_pattern_spotter -> gen_spotter.pattern
- gen_union_spotter -> gen_spotter.union
The gen_xxx_spotter functions will work (with warning) until at least next release.
Not focusable windows are now ignored when computing jump spots.

Expand

Add gen_spotter.vimpattern() that can generate spotter based on Vimscript (not Lua) pattern.

mini.misc

Expand

Update zoom() to return whether current buffer is zoomed in. By @loichyan, PR #1954.

mini.pick

Expand

“Paste” action now supports special registers: <C-w> (word at cursor), <C-a> (WORD at cursor), <C-l> (line at cursor), <C-f> (filename at cursor).

mini.sessions

Refine

Update read() to write currently read session only if MiniSessions.config.autowrite is set to true.

mini.surround

Evolve

Stop creating update_n_lines mapping: it occupies “mapping real estate” while being rarely needed and straightforward to create manually using MiniSurround.update_n_lines().

Refine

Update gen_spec.inpuf.treesitter() to have use_nvim_treesitter = false as default option value (instead of true). It used to implement more advanced behavior, but as built-in vim.treesitter is capable enough, there is no need in extra dependency. The option will be removed after the release.

mini.test

Refine

Soft deprecate ignore_lines option in expect.reference_screenshot() in favor of more capable ignore_text and ignore_attr options. For example, ignore_lines = { 1 } is the same as supplying both ignore_text = { 1 } and ignore_attr = { 1 }.

It will work at least until the next release, after which its support will be removed. Sorry for the inconvenience.

Expand

Update expect.reference_screenshot() to support separate ignoring of text and attribute screenshot data via new ignore_text and ignore_attr options.

Version 0.16.0

All

Evolve

Unify behavior of floating windows:
- Truncate title/footer from left if it is too wide.
- Set default title if window is allowed to have border.
- Use single space padding for default title/footer.
- Use ‘single’ as default window border in modules where it can be configured. On Neovim>=0.11 also respect non-empty ‘winborder’ option with lower precedence than explicitly configured value for the module.
Unify how module-related buffers are named: mini<module-name>://<buffer-number>/<useful-info>. This structure allows creating identifiable, reasonably unique, and useful buffer names. This is a user facing change because in some cases the shown buffer’s name will change (like in statusline of opened ‘mini.starter’ buffer or output of :buffers!).
Stop forcing recommended option values behind set_vim_settings config setting. Instead set them automatically in setup(). If it is not essential, do so only if it was not set by user/plugin beforehand (no matter the value). Document this as a new general principle to be followed in the future. Affected modules:
- ‘mini.bufremove’ (do nothing as recommended ‘hidden’ is on by default)
- ‘mini.completion’ (conditionally set ‘completeopt=menuone,noselect’ and flags “c” in ‘shortmess’)
- ‘mini.statusline’ (do nothing as recommended ‘laststatus=2’ is default)
- ‘mini.tabline’ (unconditionally set ‘showtabline=2’, as it is essential to module’s functinonality)

Refine

Soft deprecate support for Neovim 0.8. It will be fully stopped in next release.

mini.ai

Refine

Visual textobject selection now puts the cursor on the right edge instead of left. This better aligns with the (undocumented) behavior of how built-in a / i textobjects work in Visual mode, as opposed to the (documented in :h operator-resulting-pos) behavior of how it is done after applying the operator.

Expand

Textobject identifier can now be any single character supported by :h getcharstr(). This also makes it possible to use characters outside of Latin alphanumeric and punctuation sets as custom_textobjects keys. Default textobject is extended to be anything but Latin letters (to fall back to :h text-objects).
Update gen_spec.treesitter() to respect capture ranges specified by query directives (like (#offset! @table.inner 0 1 0 -1)).

mini.base16

Refine

Update ‘mini.pick’ highlight groups to show prompt text with same colors as match ranges, as they are connected.

Expand

Add support for colored markdown headings.
Add new plugin integrations:
- ‘ibhagwan/fzf-lua’
- ‘MeanderingProgrammer/render-markdown.nvim’
- ‘OXY2DEV/helpview.nvim’
- ‘OXY2DEV/markview.nvim’

mini.colors

Expand

Update convert() to have adjust_lightness option which can be used to disable lightness adjustment (which is enabled by default for a more uniform progression from 0 to 100). This can be useful for output to be more consistent with other Oklab/Oklch implementations.

mini.comment

Expand

Update textobject to respect ignore_blank_line option. Blank lines between commented lines are treated as part of a textobject.

mini.completion

Evolve

Add snippet support. By default uses ‘mini.snippets’ to manage snippet session (if enabled, **highly recommended), falls back to vim.snippet on Neovim>=0.10. See “Snippets” section in :h MiniCompletion for more details.

This affect existing functionality because items with Snippet kind are no longer filtered out by default.
Rework how LSP completion items are converted to Neovim’s completion items:
- Show detail highlighted as buffer’s language at the start of info window, but only if detail provides information not already present in documentation. It was previously used as extra text in the popup menu (via menu field), but this doesn’t quite follow LSP specification: detail and documentation fields can be delayed up until completionItem/resolve request which implies they should be treated similarly.
- Show labelDetails as a part of the popup menu via menu completion item field.
Rework how information window is shown with the goal to reduce flickering during fast up/down navigation through completion candidates:
- Do not close the window immediately after the move. Instead highlight border with MiniCompletionInfoBorderOutdated immediately while update window when its content is ready. Close the window only if no candidate is selected.
- Show content of already visited/resolved candidate without delay.
- Show default -No-info- text if there is no extra information about the candidate.
Update behavior and capabilities of default_process_items():
- Add filtersort option to control how items are filtered and/or sorted. Its new default value has changed behavior: do fuzzy matching if ‘completeopt’ option contains “fuzzy” entry; same as before otherwise.
- Add kind_priority option to allow arranging items by completion item kind (like “Variable”, “Snippet”, “Text”, etc.) after applying filtersort. This allows finer filter and/or sort based on kind, like “put Variable on top, Snippet on bottom, remove Text”.
- Use filterText and label item fields during matching (instead of textEdit.newText, insertText, and label as before). This is more aligned with LSP specification.

Refine

Prefer in some cases to use nil as default config value with explicit fallback. This should not have any user facing effects and marked as breaking only because a structure of a default config has changed. Affected fields:
- lsp_completion.process_items (use default_process_items as fallback) and fallback_action (use '<C-n>' as fallback). This makes it more aligned with other modules that usually avoid using function values in default config.
- window.info.border and window.signature.border (use non-empty ‘winborder’ and 'single' as fallback).
Change default value of MiniCompletionActiveParameter highlight group to link to LspSignatureActiveParameter (instead of forcing underline).
Call lsp_completion.process_items with an array of items from all buffer servers at once (and not for each server separately). This can be used for more elaborate filter/sort strategies.

Expand

Add scrolling in info and signature window. By default can be done with <C-f> / <C-b> when target window is shown. Can be configured via mappings.scroll_down and mappings.scroll_up config options.
Respect isIncomplete in LSP completion response and immediately force new completion request on the next key press.
Add support for context in ‘textDocument/completion’ request.
Both info and signature help windows now use tree-sitter highlighting:
- Info window uses “markdown” parser (works best on Neovim>=0.10 as its parser is built-in). Special markdown characters are concealed (i.e. hidden) which might result into seemingly unnecessary whitespace as dimensions are computed not accounting for that.
- Signature help uses same parser as in current filetype.
Update signature help without delay if it is already shown. This helps to keep signature help up to date after cursor jumps in Insert mode (like during snippet session).
Add support for item defaults in CompletionList response.
Add get_lsp_capabilities() that returns data about which part of LSP specification is supported in ‘mini.completion’.
Input items for lsp_completion.process_items now have client_id field with the identifier of the server that item came from. Use vim.lsp.get_client_by_id() to get an actual data about the server.

mini.diff

Expand

The config.source can now be array of sources, which will be attempted to attach in order. Important for source’s attach to either return false or call MiniDiff.fail_attach() (even not immediately) to signal that source has failed to attach to a particular buffer.
Overlay virtual lines now scroll horizontally along with buffer lines. Requires Neovim>=0.11 and disabled ‘wrap’ option.
Highlighting of buffer parts of change hunks can now be customized with these new highlight groups:
- MiniDiffOverChangeBuf - changed buffer text. Previously used MiniDiffOverChange (for changed reference text); links to it by default.
- MiniDiffOverContextBuf - context of a change shown in buffer overlay. Previously not highlighted, default highlight group is not created.

mini.doc

Expand

FEATURE: improve detection and formatting for types in @param, @return, and similar.

mini.fuzzy

Refine

Update process_lsp_items() to only use filterText and label item fields during fuzzy matching (instead of textEdit.newText, insertText, and label as before). This is more aligned with LSP specification.
Treat empty word as matching any candidate (matched positions is empty array and score is -1). This behavior is usually more useful in practice.

mini.hues

Evolve

Refine

Update ‘mini.pick’ highlight groups to show prompt text with same colors as match ranges, as they are connected.

Expand

Add support for colored markdown headings.
Add new plugin integrations:
- ‘ibhagwan/fzf-lua’
- ‘MeanderingProgrammer/render-markdown.nvim’
- ‘OXY2DEV/helpview.nvim’
- ‘OXY2DEV/markview.nvim’

mini.keymap

Expand

Introduction of a new module.

mini.notify

Expand

Add lsp_progress.level option to control level of LSP progress notifications.
Add MiniNotifyLspProgress highlight group to be used for LSP progress notifications.
Add data field to notification specification and as a new argument to MiniNotify.add(). It can be used to store any data relevant to the notification. For example, notifications from make_notify() output set source field to 'vim.notify', while notifications from LSP progress set source to 'lsp_progress'.

mini.operators

Expand

Update setup() to remap built-in gx Normal/Visual mode mappings (for opening an URI under cursor) to gX (if that is not already taken).

mini.pairs

Expand

Update all actions to work with pairs containing multibyte characters (like “¿?”, “「」”, and similar).

mini.pick

Refine

Rename prompt_cursor in config.window to prompt_caret for better naming consistency. It works for now, but will stop in the next release. Sorry for the inconvenience.

Expand

Add MiniPickPromptCaret and MiniPickPromptPrefix highlight groups to allow finer customization of picker’s prompt.
Update get_picker_matches() to return data (items and indexes) about currently shown items.
Update set_picker_match_inds() to be able to set current match and marked items indexes.

mini.snippets

Expand

Add start_lsp_server() to start specialized in-process LSP server to show loaded snippets inside (auto)completion engines (like ‘mini.completion’).

mini.statusline

Refine

Function section_fileinfo() got several updates:
- File size is now computed based on the current buffer text and not for file’s saved version.
- File info is now shown even for buffers with empty ‘filetype’. It previously was treated as a sign of a “temporary buffer”, but it might be a result of an unsuccessful filetype matching.

mini.surround

Expand

Surrounding identifier can now be any single character supported by :h getcharstr(). This also makes it possible to use characters outside of Latin alphanumeric and punctuation sets as custom_surroundings keys.
Update gen_spec.input.treesitter() to respect capture ranges specified by query directives (like (#offset! @table.inner 0 1 0 -1)).

mini.tabline

Expand

Add support for showing special (truncation) characters at left and/or right if there are more tabs to the left and/or right. They are shown with the new MiniTablineTrunc highlight group in case ‘list’ option is enabled (i.e. user deliberately enabled similar functionality for windows). Exact characters are taken from ‘listchars’ option: precedes and extends fields.
Labels for quickfix and location lists are now different.

Version 0.15.0

mini.align

Expand

Add built-in modifier for “|” character with aligning Markdown-like tables in mind.

mini.animate

Evolve

Add max_output_steps option to gen_path.line() and gen_path.angle() to limit the number of steps the return. Default is 1000 to improve performance on large cursor jumps which also is set for config.cursor.path.

mini.files

Expand

Closing and refreshing explorer now requires confirmation only if there are pending file system actions (and not in case of at least one modified buffer present).
Confirming file system actions in synchronize() now can cancel synchronization (by pressing c) while keeping buffer contents the same. synchronize() also returns a boolean representing whether synchronization was done.

mini.git

Expand

Git data is computed after resolving symlinks. This allows working with files symlinked into outside of Git repo. This behavior is the same as in ‘mini.diff’.

mini.hipatterns

Refine

Make MiniHipatterns{Fixme,Hack,Todo,Note} highlight groups by default be reverse and bold variant of Diagnostic{Error,Warn,Info,Hint} group instead of directly link to them. This ensures better visibility for color schemes which don’t have explicit ‘mini.hipatterns’ support.

mini.hues

Expand

Add 'lowmedium' and 'mediumhigh' saturation levels.

mini.icons

Expand

Add distinctive glyphs and highlighting for special Neovim directories (from :h 'runtimepath').

mini.indentscope

Evolve

Add options.n_lines option to limit the scope computation (for better performance). It’s default value is 10000 while previous behavior behavior had no restriction (as with n_lines = math.huge) which should matter only in very big scopes.
Add draw.predicate configuration to customize whether the scope should be autodrawn. It’s default value does not draw scope with incomplete computation (i.e. interrupted due to options.n_lines value), which should matter only in very big scopes.

mini.notify

FEATURE: setup() now also can be used to clean history (for example, like MiniNotify.setup(MiniNotify.config)).

mini.pick

Evolve

Picker window now has local current directory set to source’s cwd. This allows easier code for “in window” functions (callable items, choose, preview, etc.) as relative paths will be properly resolved. It also results in some changes:
- Calling set_picker_items_from_cli() with active picker now resolves explicitly set to relative path spawn_opts.cwd against picker’s cwd (and not against global current directory as was done previously).

Expand

Update grep and grep_live pickers to allow globs local option which restricts search to files that match any of its glob patterns (for example, { '*.lua', 'lua/**' } will only search in Lua files and files in ‘lua’ directory). The grep_live picker also has custom <C-o> mapping to add globs interactively after picker is opened.
Update help picker to have default_split local option which customizes split direction of choose action (<CR> by default).
Update ui_select() to allow fourth argument start_opts to customize MiniPick.start() call.
Add MiniPickMatch event triggered after updating query matches or setting items. Can be used, for example, to adjust window height based on current matches.

mini.snippets

Expand

Introduction of a new module.

mini.surround

Refine

Created mappings for find, find_left, and highlight are now not dot-repeatable. Dot-repeat should repeat last text change but neither of those actions change text. Having them dot-repeatable breaks the common “move cursor -> press dot” workflow. Initially making them dot-repeatable was a “you can but you should not” type of mistake.

mini.test

Evolve

Now calling skip() in set’s pre_case hook results in skipping all test cases in a set. Calling in other hooks has no effect. This enables a more structured skipping of all test cases inside a set. To skip inside hooks, use add_note() followed by return.

Expand

Add n_retry test set property. When set, each case will be tried that at most that many times until first success (if any).
Add hooks.pre_source and hooks.post_source fields to collected cases. They can be either 'once' or 'case' and allow a more granular control over case execution.
Function finally() now can be called several times inside a single function with callbacks executed in order of how they were registered.
Update expect.reference_screenshot() to allow directory option pointing to a directory where automatically constructed reference path is located.

Version 0.14.0

All

Evolve

Update help files to use code blocks with language annotation, as it results in a better code highlighting. Implies enabled tree-sitter highlighting in ‘help’ filetype:
- It is default in Neovim>=0.10.
- Tree-sitter parser is built-in in Neovim 0.9.x, needs manual enabling via vim.treesitter.start().
- Has visual regressions on Neovim 0.8.0 and 0.8.1 without enabled tree-sitter (code blocks are highlighted as normal text). Use 0.8.2 or newer.
Universally prefer ‘mini.icons’ module over ‘nvim-tree/nvim-web-devicons’.

Refine

Stop official support of Neovim 0.7.

Expand

Start automated testing on Windows and MacOS.
Universally ensure that all plugin’s highlight groups are defined after any color scheme takes effect.

mini.base16

Expand

Add ‘kevinhwang91/nvim-bqf’ plugin integration.

mini.completion

Expand

Add highlighting of LSP kind (like “Function”, “Keyword”, etc.). Works only on Neovim>=0.11. Requires enabled ‘mini.icons’ to work out of the box.

mini.doc

Evolve

Update afterlines_to_code() to result into Lua code block in help file by using >lua at the start instead of >. NOTE: users need enabled help tree-sitter parser (which is default on Neovim>=0.9) for code blocks to have proper highlighting.

mini.extra

Refine

Use “│” as line/position separator instead of “:”. This aligns with changes in ‘mini.pick’ and makes line/position more easily visible.

Expand

Update oldfiles picker to have current_dir option which if true shows files only from picker’s working directory. By @abeldekat, PR #997.
Update git_hunks, list, and lsp pickers to show icons. Scopes document_symbol and workspace_symbol in lsp picker show icon based on LSP kind (requires set up ‘mini.icons’), others - based on path data.
Update buf_lines and oldfiles pickers to have preserve_order local option, similar to visit_paths picker. Other possible candidates for this option are intentionally not updated to not increase maintenance (manually override match source method to call MiniPick.default_match() with { preserve_order = true } options).
Update buf_lines picker to pad line numbers to achieve more aligned look.

mini.git

Expand

Update show_at_cursor() to include commit’s statistics when showing commit.
Update show_at_cursor() to show relevant at cursor commit data inside ‘mini.deps’ confirmation buffer.

mini.hipatterns

Evolve

Update compute_hex_color_group() to compute based on combination of hex_color and style, opposed to just hex_color. This allows simultaneous usage of several styles in user’s custom highlighters.

mini.hues

Expand

Implement apply_palette() (to compliment make_palette()) providing a way to tweak applied palette before applying it.
Add ‘kevinhwang91/nvim-bqf’ plugin integration.

mini.files

Evolve

Refine

Update how confirmation lines are computed:
- Show create actions in the group directory where text manipulation took place. This matters during creating nested entries and is usually a more intuitive representation.
- For delete show its type after the file name (“permanently” or “to trash”) as an additional visual indication of delete type.
- For create, copy and move prefer showing its “to” path relative to group directory.
- Separate action name and paths with “│” (instead of “:”) for better visual separation.
- Don’t enclose paths in quotes. Initially it was done to reliably show possible whitespace in paths, but inferring it from overall line structure should be good enough.
Soft deprecate get_target_window() in favor of get_explorer_state().target_window. Will be completely removed after the next release.

Expand

Prefer using ‘mini.icons’ as icon provider.
Implement bookmarks. With default config:
- Type m followed by a single character <char> to set directory path of focused window as a bookmark with id <char>.
- Type ' followed by a bookmark id to make bookmark’s path focused in explorer.
- Use MiniFiles.set_bookmark() inside MiniFilesExplorerOpen event to set custom bookmarks.
Make data for MiniFilesActionDelete contain to field in case of not permanent delete.
Make file manipulation work better for special complex/overlapping cases (like delete ‘file-a’ and copy ‘file-b’ as ‘file-a’). It is still a better idea to split overlapping manipulations into smaller and not related steps, as there are cases which won’t work.
Add get_explorer_state() to allow more reliable user customizations.
Add set_branch() to allow to set what paths should be displayed and focused.

mini.icons

Expand

Introduction of a new module.

mini.misc

Expand

Implement setup_termbg_sync() to set up terminal background synchronization (removes possible “frame” around current Neovim instance). Works only on Neovim>=0.10.

mini.pick

Evolve

Refine

Update default_match() to have table opts as fourth argument (instead of boolean do_sync). Use { sync = true } to run synchronously. The new design is more aligned with other functions and is more forward compatible.
Encoding line or position in string items has changed:
- Use “\0” (null character; use “\000” form if it is in a string before digit) instead of “:” as delimiter. This makes it work with files similar to “:” position encoding (like “time_12:34:56”). This only matters for custom sources which provide line or position in string items.
- Update default_show() to display “│” character instead of “\0” in item’s string representation (previously was “:”). In particular, this changes how line/position is displayed in grep and grep_live built-in pickers. This change was done because “│” is more visible as separator.

Expand

Prefer using ‘mini.icons’ as icon provider.
Add preserve_order option to default_match() to allow asynchronous matching which preserves order (i.e. doesn’t do sort step of fuzzy matching).
Explicitly hide cursor when picker is active (instead of putting it in command line).

mini.starter

Refine

Change filetype of Starter buffer from ‘starter’ to ‘ministarter’. This is a more robust value and more aligned with other modules.

mini.statusline

Refine

Update section_fileinfo() to show non-empty filetype even in not normal buffers (like plugin’s scratch buffers, help, quickfix, etc.). Previously it showed nothing, which was a mistake as filetype can be a valuable information.
The default set_vim_settings config value now does not affect laststatus = 3 (aka global statusline).

Expand

Prefer using ‘mini.icons’ as icon provider for section_fileinfo().

mini.surround

Refine

Adding surrounding in linewise mode now also ignores trailing whitespace on the last line (same as it ignores indent on the first line).

mini.tabline

Expand

Prefer using ‘mini.icons’ as icon provider.

mini.test

Expand

Make it work on Windows. By @cameronr, PR #1101.

Version 0.13.0

mini.comment

Refine

Blank lines are now completely ignored when deciding the toggling action. In practice this means that if target block consists only from commented and/or blank lines, it will be uncommented rather than commented.
Whitespace in comment parts is now treated more explicitly. In particular:
- Default options.pad_comment_parts = true now more explicitly means that any value of ‘commentstring’ is transformed so that comment parts have exactly single space inner padding.
  
  Example: any /*%s*/, /* %s */, or /* %s */ is equivalent to having /* %s */.
- Detection of whether consecutive lines are commented or not does not depend on whitespace in comment parts. Uncommenting is first attempted with exact comment parts and falls back on trying its trimmed parts.
  
  Example of toggling comment on single line with /* %s */ ‘commentstring’ value:
  - /* this is commented */ -> this is commented.
  - /*this is also commented */ -> this is also commented (notice trailing space).
- Commenting blank lines is done with trimmed comments parts, while uncommenting explicitly results into empty lines.

Expand

Support dot-repeat after initial commenting is done for visual selection; repeating is done for same relative range.

mini.deps

Expand

Add MiniDepsMsgBreaking highlight group for messages indicating a breaking change in a conventional commit style.

mini.diff

Expand

Introduction of a new module.

mini.files

Expand

Add new MiniFilesExplorerOpen and MiniFilesExplorerClose events.

mini.git

Expand

Introduction of a new module.

mini.hues

Refine

Update some highlight groups for better usability:
- DiffChange and DiffText - make changed diff lines have colored background.
- Folded - make folds differ from CursorLine.
- QuickFixLine - make current quickfix item differ from CursorLine.

mini.map

Expand

Add gen_integration.diff() which highlights general diff hunks from ‘mini.diff’.

mini.pick

Evolve

Refine

Stop trying to parse path for special format (“path:row” and “path:row:col”) if supplied inside a table item. This made impossible working with paths containing “:”.
Update builtin.files() to use table items when string item might be ambiguous.

Expand

Respect general URI format for paths inside table items.

mini.starter

Refine

Explicitly block all events in open() during startup for a better performance.

mini.statusline

Evolve

Update section_git() to prefer using data from ‘mini.git’ with fallback on pure HEAD data from ‘lewis6991/gistigns.nvim’.
Update default active content:
- Add section_diff() (shows diff data near  icon) following refactor of section_git().
- Add section_lsp() (shows number of attached LSP servers near 󰰎 icon) following refactor of section_diagnostics().

Refine

Update section_diagnostics() to depend only on defined diagnostic. This means:
- Something is shown only if there is any diagnostic actually present in the buffer. No diagnostic entries - nothing is shown. Previously it did not show if there was no LSP servers attached (as initially diagnostics came only from LSP) or buffer was not normal.
- Fallback icon is “Diag” instead of “LSP”.

Expand

Update section_diagnostics() to support signs table option to customize signs for severity levels.
Add section_diff() to show data from ‘mini.diff’ with fallback on diff data from ‘lewis6991/gistigns.nvim’.
Add section_lsp() to show indicator of LSP servers attached to the buffer.

mini.tabline

Expand

Implement config.format for custom label formatting.

mini.test

Refine

Child process is now created with extra --headless --cmd "set lines=24 columns=80" arguments making it headless but still reasonably similar to fully functioning Neovim during interactive usage. This change should generally not break a lot of things, while enabling a faster and more robust test execution.

Version 0.12.0

mini.basics

Refine

Remove <C-z> mapping, as it is more useful in most terminal emulators for suspending Neovim process (to later resume with fg command). To correct latest misspelled word, use mappings like this:

vim.keymap.set('n', '<C-z>', '[s1z=',                     { desc = 'Correct latest misspelled word' })
vim.keymap.set('i', '<C-z>', '<C-g>u<Esc>[s1z=`]a<C-g>u', { desc = 'Correct latest misspelled word' })

Expand

Add tab:> to ‘listchars’ option when options.extra_ui is set. This prevents showing ^I instead of a tab and actual value comes from Neovim’s default.
Set termguicolors only on Neovim<0.10, as later versions should have it on by default (if terminal emulator supports it).

mini.comment

Expand

Hooks are now called with data about commenting action.

mini.deps

Expand

Introduction of a new module.

mini.doc

Refine

Stop using :echo to display messages and warnings in favor of vim.notify().
Update default write_post hook to not display current time in success message.
Update to include space before ~ in generated section headings.

mini.files

Expand

Update go_in() to have close_on_file option.
Show warning if action is set to override existing path.

mini.hues

Refine

Update verbatim text (@text.literal and @markup.raw) color to be distinctive instead of dimmed.

Expand

Add support for new standard tree-sitter captures on Neovim>=0.10 (see https://github.com/neovim/neovim/pull/27067).

mini.misc

Refine

Update bench_time() to use vim.loop.hrtime() (as better designed for benchmarking) instead of vim.loop.gettimeofday().

mini.notify

Expand

Introduction of a new module.

mini.pick

Expand

Implement window.prompt_cursor and window.prompt_prefix config options.
Update builtin.help() to use tree-sitter highlighting (if there is any).

mini.sessions

Refine

Update read() to first write() current session (if there is any).

mini.starter

Expand

Add sections.pick() with ‘mini.pick’ pickers.

mini.statusline

Evolve

Add search_count section to default active content.

mini.visits

Expand

Introduction of a new module.

Version 0.11.0

mini.base16

Refine

Stop supporting deprecated ‘HiPhish/nvim-ts-rainbow2’.

mini.bufremove

Evolve

Applying delete() and wipeout() without force in a modified buffer now asks for confirmation instead of declining and showing message.

mini.clue

Expand

Value of config.window.config now can be callable returning window config.

mini.comment

Expand

Implement config.mappings.comment_visual to configure mapped keys in Visual mode.

mini.completion

Evolve

Start adding C flag to shortmess option on Neovim>=0.9. By @yamin-shihab, PR #554.

mini.extra

Expand

Introduction of a new module.

mini.files

Refine

Opening file which is present in unlisted buffer now makes the buffer listed.
Highlight in preview now is not enabled if file is sufficiently large.

Expand

Explorer now tracks if focus is lost and properly closes on detection.
Implement MiniFilesCursorLine highlight group.

mini.hipatterns

Refine

Field priority in highlighter definitions is soft deprecated in favor of extmark_opts = { priority = <value> }.

Expand

Allow pattern in highlighter definitions to be an array to highlight several patterns under the same highlighter name.
Implement extmark_opts in highlighter definitions for a more control over extmarks placed at matches.
Update compute_hex_color_group() to allow style = 'fg'.
Update gen_highlighter.hex_color() to allow style = 'inline' (requires Neovim>=0.10 with support of inline extmarks).
Implement get_matches() to get buffer matches.

mini.hues

Refine

Stop supporting deprecated ‘HiPhish/nvim-ts-rainbow2’.

mini.map

Expand

Implement config.window.zindex to configure z-index of map window.

mini.misc

Expand

Update setup_auto_root() and find_root() to now have fallback argument to be applied when no root is found with vim.fn.find().

mini.pick

Expand

Introduction of a new module.

mini.starter

Expand

Value of show_path in sections.recent_files() can now be callable for more control on how full path is displayed.

mini.test

Evolve

Update child.get_screenshot() to now by default call :redraw prior to computing screenshot. Can be disabled by new opts.redraw argument.

Refine

Error in any “pre” hook now leads to test case not being executed (with note).

Expand

New method child.lua_func() can execute simple functions inside child process and return the result (stasjok, #437).
Update expect.reference_screenshot() to now have ignore_lines option allowing to ignore specified lines during screenshot compare.

Version 0.10.0

mini.ai

Expand

Allow vis_mode field in custom texobject region to force Visual mode with which textobject is selected.

mini.animate

Expand

Add MiniAnimateNormalFloat highlight group to tweak highlighting of open and close animations.

mini.base16

Expand

Add ‘HiPhish/rainbow-delimiters.nvim’ integration.

mini.basics

Refine

Remove <C-w> mapping in Terminal mode, as it is more useful inside terminal emulator itself.

mini.bracketed

Expand

Add add_to_jumplist option to relevant targets (which move cursor and don’t already add to jumplist).

mini.bufremove

Refine

Create normal buffer instead of scratch when there is no reasonable target to focus (#394).

mini.clue

Expand

Introduction of a new module.

mini.files

Expand

Introduction of a new module.

mini.hues

Expand

Add ‘HiPhish/rainbow-delimiters.nvim’ integration.

mini.jump2d

Expand

Add gen_union_spotter() to allow combining separate spotters into one.

mini.operators

Expand

Introduction of a new module.

mini.pairs

Expand

Allow false in config.mappings to not map the key.

mini.surround

Expand

Update add (sa) with ability to replicate left and right parts by respecting [count]. In Normal mode two kinds of [count] is respected: one for operator (replicates left and right parts) and one for textobject/motion. In Visual mode [count] replicates parts.

Version 0.9.0

All

Evolve

Use Lua API to create autocommands. Stop exporting functions only related to autocommands.
Use vim.keymap to deal with mappings. Stop exporting functions only related to mappings.

Refine

Stop official support of Neovim 0.6.

Expand

Add ‘randomhue’ color scheme.

mini.base16

Evolve

Stop supporting archived ‘p00f/nvim-ts-rainbow’ in favor of ‘HiPhish/nvim-ts-rainbow2’.

Expand

Add new integrations:
- Lsp semantic tokens.
- ‘folke/lazy.nvim’.
- ‘folke/noice.nvim’.
- ‘kevinhwang91/nvim-ufo’.

mini.basics

Expand

Add dot-repeat support for adding empty lines (go and gO mappings).

mini.colors

Expand

Introduction of a new module.

mini.comment

Expand

Use tree-sitter information about locally active language to infer ‘commentstring’ option value.
Add options.custom_commentstring option for a more granular customization of comment structure.
Add get_commentstring() function representing built-in logic of computing relevant ‘commentstring’.

mini.hipatterns

Expand

Introduction of a new module.

mini.hues

Expand

Introduction of a new module.

Version 0.8.0

All

Expand

Add and implement design principle for silencing module by setting config.silent = true. It is now present in modules capable of showing non-error feedback:
- mini.ai
- mini.align
- mini.basics
- mini.bufremove
- mini.doc
- mini.jump
- mini.jump2d
- mini.starter
- mini.surround
- mini.test

mini.bracketed

Expand

Introduction of a new module.

mini.comment

Expand

Add options.start_of_line option which controls whether to recognize as comment only lines without indent.
Add options.ignore_blank_line option which controls whether to ignore blank lines.
Add options.pad_comment_parts option which controls whether to ensure single space pad for comment leaders.

mini.doc

Expand

Add config.hooks.write_pre hook to be executed before writing to a file.

mini.indentscope

Expand

Add MiniIndentscopeSymbolOff highlight group to be used if scope’s indent is not multiple of ‘shiftwidth’.
Add draw.priority option to control priority of scope line draw.

mini.jump2d

Expand

Add view.n_steps_ahead option which controls how many steps ahead to show. Appearance is controlled by new MiniJump2dSpotAhead highlight group.
Add view.dim option which controls whether to dim lines with at least one jump spot. Appearance is controlled by new MiniJump2dDim highlight group.
Add MiniJump2dSpotUnique highlight group to be used for spots with unique label for next step.

mini.pairs

Expand

Both MiniPairs.br() and MiniPairs.cr() can now take a key which will be used instead of default <BS> and <CR>.

mini.sessions

Expand

Update setup() to now create global directory at path config.directory if it doesn’t exist.
All actions now keep list of detected sessions up to date.

mini.splitjoin

Expand

Introduction of a new module.

mini.surround

Expand

Add respect_selection_type option which, when enabled, makes adding and deleting surrounding respect selection type:
- Linewise adding places surrounding parts on separate lines while indenting surrounded lines once.
- Deleting surrounding which looks like a result of linewise adding will act to revert it: delete lines with surrounding parts and dedent surrounded lines once.
- Blockwise adding places surrounding parts on whole edges, not only start and end of selection.

Version 0.7.0

All

Expand

Start dual distribution. Every module is now distributed both as part of ‘mini.nvim’ library and as standalone plugin (in separate git repository).

mini.ai

Refine

In MiniAi.gen_spec.argument() option separators (plural; array of characters) is soft deprecated in favor of separator (singular; Lua pattern) option.

mini.animate

Expand

Introduction of a new module.

mini.basics

Expand

Introduction of a new module.

mini.completion

Refine

Rename MiniCompletion.config.window_dimensions to MiniCompletion.config.window to be able to handle more general configuration.

Expand

Add MiniCompletion.config.window.info.border and MiniCompletion.config.window.signature.border which can be used to define border of info and signature floating windows respectively.

mini.indentscope

Refine

Stop using (deprecate) MiniIndentscopePrefix highlight groups. It was initially introduced as a way to properly show scope indicator on empty lines. It had a drawback of overshadowing ‘listchars’ symbols (see #125) and vertical guides from ‘lukas-reineke/indent-blankline.nvim’. As the other implementation approach was found by @mivort (see #161), MiniIndentscopePrefix is no longer needed and no overshadowing is done.
Update MiniIndentscope.gen_animation to now be a table (for consistency with other gen_* functions in ‘mini.nvim’). See “Migrate from function type” section of :h MiniIndentscope.gen_animation. Calling it as function will be available until next release.

mini.misc

Expand

Add MiniMisc.setup_auto_root() and MiniMisc.find_root() for root finding functionality. NOTE: requires Neovim>=0.8.
Add MiniMisc.setup_restore_cursor() for automatically restoring latest cursor position on file reopen. By @cryptomilk, PR #198.

mini.move

Expand

Introduction of a new module.

Version 0.6.0

All

Refine

Stop official support of Neovim 0.5.

Expand

Make all messages use colors and not cause hit-enter-prompt.

mini.align

Expand

Introduction of a new module.

mini.base16

Refine

Change some ‘mini.nvim’ highlights:
- MiniCompletionActiveParameter now highlights with background instead of underline.
- MiniJump2dSpot now explicitly defined to use plugin’s palette.
- MiniStarterItemPrefix and MiniStarterQuery are now bold for better visibility.
Update highlight for changed git diff to be more visible and to comply more with general guidelines.

Expand

Add support for many plugin integrations.
Implement MiniBase16.config.plugins for configuring plugin integrations.

mini.jump

Refine

Allow cursor to be positioned past the end of previous/current line (#113).

mini.map

Expand

Introduction of a new module.

mini.starter

Refine

Item evaluation is now prepended with query reset, as it is rarely needed any more (#105).
All hooks are now called with (content, buf_id) signature allowing them properly use current window layout.

mini.surround

Evolve

Update ‘mini.surround’ to share as much with ‘mini.ai’ as possible. This provides more integrated experience while enabling more useful features. Details:
- Custom surrounding specification for input action has changed. Instead of { find = <string>, extract = <string> } it is now { <function or composed pattern> }. Previous format will work until the next release. See more in help file.
- Algorithm for finding surrounding is now more powerful. It allows searching for more complex surroundings (via composed patterns or array of region pairs) and respects v:count.
- Multiline input and output surroundings are now supported.
- Opening brackets ((, [, {, <) now include whitespace in surrounding: input surrounding selects all inner edge whitespace, output surrounding is padded with single space.
- Surrounding identifier i (“interactive”) is soft deprecated in favor of ? (“user prompt”).
- New surrounding aliases:
  - b for “brackets”. Input - any of balanced (), [] {}. Output - ().
  - q for “quotes”. Input - any of ", ', `. Output - "".
- Three new search methods 'prev', 'next', and 'nearest' for finding non-covering previous and next surrounding.
Implement “last”/“next” extended mappings which force 'prev' or 'next' search method. Controlled with config.mappings.suffix_last and config.mappings.suffix_nextrespectively. This also means that custom surroundings with identifier equal to “last”/“next” mappings suffixes (defaults to ‘l’ and ‘n’) will work only with long enough delay after typing action mapping.

Expand

Implement MiniSurround.gen_spec with generators of common surrounding specifications (like MiniSurround.gen_spec.input.treesitter for tree-sitter based input surrounding).

Version 0.5.0

All

Refine

Update all tests to use new ‘mini.test’ module.

Expand

Implement buffer local configuration. This is done with vim.b.mini*_config buffer variables.
Add new minicyan color scheme.

mini.ai

Introduction of a new module.

mini.comment

Expand

Now hooks can be used to terminate further actions by returning false (#108).

mini.indentscope

Refine

Soft deprecate vim.b.miniindentscope_options in favor of using options field of miniindentscope_config.

mini.sessions

Expand

Hooks are now called with active session data as argument.

mini.starter

Evolve

Refine

Deprecate MiniStarter.content in favor of MiniStarter.get_content().

Expand

Make it possible to open multiple Starter buffers at the same time (#82).
All functions dealing with Starter buffer now have buf_id as argument.

mini.statusline

Expand

Implement config.use_icons which controls whether to use icons by default.

mini.test

Introduction of a new module.

mini.trailspace

Expand

Implement MiniTrailspace.trim_last_lines().

Version 0.4.0

All

Expand

Update all modules to supply mapping description for Neovim>=0.7.
Cover all modules with extensive tests.

mini.comment

Expand

Implement config.hooks with pre and post hooks (executed before and after successful commenting). Fixes #50, #59.

mini.completion

Expand

Implement support for additionalTextEdits (issue #61).

mini.jump

Refine

Soft deprecate config.highlight_delay in favor of config.delay.highlight.

Expand

Implement idle timeout to stop jumping automatically (@annenpolka, #56).
Implement MiniJump.state: table with useful model-related information.
Update process of querying target symbol: show help message after delay, allow <C-c> to stop selecting target.

mini.jump2d

Introduction of a new module.

mini.pairs

Refine

Create mappings for <BS> and <CR> in certain mode only after some pair is registered in that mode.

mini.sessions

Refine

All feedback about incorrect behavior is now an error instead of message notifications.

Expand

Implement MiniSessions.select() to select session interactively and perform action on it.
Implement config.hooks to execute hook functions before and after successful action.

mini.starter

Expand

Allow config.header and config.footer be any value, which will be converted to string via tostring().
Update query logic to not allow queries which result into no items.
Add <C-n> and <C-p> to default mappings.

mini.statusline

Refine

Change default icon for MiniStatusline.section_diagnostics() from ﯭ to  due to former having issues in some terminal emulators.

mini.surround

Evolve

Refine

Deprecate config.funname_pattern option in favor of manually modifying f surrounding.
Always move cursor to the right of left surrounding in add(), delete(), and replace() (instead of moving only if it was on the same line as left surrounding).

Expand

Implement config.search_method.
Implement custom surroundings via config.custom_surroundings.
Implement MiniSurround.user_input().
Update process of getting user input: allow <C-c> to cancel and make empty string a valid input.

mini.tabline

Refine

Show listed buffers also in case of multiple tabpages (instead of using builtin behavior).

Expand

Implement config.tabpage_section.
Show quickfix/loclist buffers with special *quickfix* label.

Version 0.3.0

All

Expand

Update all modules to have annotations formatted for ‘mini.doc’.

mini.cursorword

Expand

Current word under cursor now can be highlighted differently.

mini.doc

Expand

Introduction of a new module.

mini.indentscope

Expand

Introduction of a new module.

mini.starter

Expand

Implement MiniStarter.set_query() and make <Esc> mapping for resetting query.

Version 0.2.0

mini.base16

Expand

Use new Diagnostic* highlight groups in Neovim 0.6.0.

mini.comment

Expand

Respect tab indentation (#20).

mini.jump

Expand

Introduction of a new module.

mini.pairs

Expand

Implement pair registration with custom mapping functions:
- Implement MiniPairs.map(), MiniPairs.map_buf(), MiniPairs.unmap(), MiniPairs.unmap_buf() to (un)make mappings for pairs which automatically register them for <BS> and <CR>. Note, that this has a minor break of previous behavior: now MiniPairs.bs() and MiniPairs.cr() don’t have any input argument. But default behavior didn’t change.
- Allow setting global pair mappings inside config of MiniPairs.setup().